Faygo, a Wanplas factory with 22 years of dedicated experience in pipe and profile extrusion, builds the HDPE perforated corrugated filter パイプ押出ライン used for well water intake and underground water collection engineering. Faygo operates three specialized factories, occupies 26,650 sqm in Zhangjiagang two hours from Shanghai Airport, and holds 13 national patents including 8 invention patents. All Faygo lines are CE and ISO certified. This guide explains how a perforated corrugated HDPE filter pipe is made, which real Faygo lines produce it, why HDPE performs in wet soil, and how to select the right line for well and drainage projects.
What an HDPE Perforated Corrugated Filter Pipe Is
An HDPE perforated corrugated filter pipe is a buried pipe made from high-density polyethylene with a ring-shaped corrugated wall and rows of holes or slots. The openings let groundwater flow in, while the corrugation gap or an outer wrap keeps soil and sand out of the flow path.
In well water intake, the pipe acts as a well screen near the bore bottom, letting clean water enter the casing while blocking gravel and fine sand. In underground water collection engineering, the same pipe forms French drains, dewatering collectors, and landfill leachate lines that gather water from the surrounding soil.
The corrugation is the key feature. It gives the thin wall high ring stiffness so the pipe holds its shape under soil load, yet the pipe stays light and flexible enough to coil or lay along a trench. Perforation turns that structure into a filter.
The pipe is built in two wall zones. The inner wall is smooth so water flows with low friction toward the outlet. The outer wall carries the rings that give stiffness. This double-character wall is what lets a thin pipe carry soil load that would crush a smooth thin tube of the same weight. The perforation is placed on the ring crest or the ring valley depending on the slotting method, and the position decides how the surrounding gravel contacts the opening.
フィルタパイプは、直径、壁クラス、開口面積、およびスロット幅の4つの数値で指定されます。直径は流量量を設定します。壁クラスは耐土壌負荷を設定します。開口面積はメートルあたりの水の入口量を設定します。スロット幅はどの土壌グレードが外に出るかを設定します。抽出ラインは最初の3つを直接制御し、スロット幅はパーオンユニットとフィールドでのラップ選択によって設定されます。
Well screen and drain pipe share the same base product but differ in opening layout. A well screen puts openings in a precise pattern so the entering velocity stays low and the pump draws evenly. A French drain puts rows of holes along the top or around the full circle so water enters from the wet soil above and beside. The same corrugated line makes both by changing the punch program, which is why one machine serves a water-well contractor and a site-drainage contractor alike.
Service life is the reason HDPE wins buried work. Steel screens rust in mineral water and concrete pipe spalls under freeze-thaw. HDPE keeps its wall for decades in wet soil because the polymer chain does not react with water, salt, or most soil chemicals. The perforation stays open because nothing in the soil dissolves the edge of the hole the way it would attack a metal screen.
Why Well and Collection Jobs Use It
Well water intake demands a screen that resists corrosion from mineral-laden water and stays open under continuous flow. HDPE does not rust and shrugs off most groundwater chemistry, so the screen keeps working for the life of the well.
地下水収集は、埋め込まれたパイプが詰まったり崩壊したりすると、全体の排水が失敗するという同じ敵に直面しています。コルクフィルタパイプは、多くの穴に取り込み面積を分散させ、入力速度を低下させ、土壌の一部分が細かいもので塞がる可能性を低減します。
Compared with concrete or steel collection pipe, HDPE corrugated filter pipe is lighter to transport, faster to lay, and free of joint corrosion. Compared with smooth HDPE pipe, the corrugated version reaches the same stiffness at a lower wall weight, cutting material cost per meter.
| Buried Pipe Type | Corrosion Resistance | Intake Area | Lay Weight |
|---|---|---|---|
| HDPE corrugated filter | Excellent | High | Low |
| Steel screen | Needs coating | Medium | High |
| Concrete pipe | Fair | Low | Very high |
For municipal engineering, agricultural irrigation, and site dewatering, the corrugated HDPE filter pipe is now the default spec because it balances flow, strength, and cost in buried service.
The intake area is the hidden cost driver. A pipe with too few holes starves the well or the drain and forces a bigger pump or a deeper trench. A pipe with too many holes and too wide a slot lets fines wash in and seals the surround. The engineering step sizes the opening area to the soil permeability, which the line maker translates into hole count and pitch on the perforation unit.
Ground movement is the second reason corrugated wins. A trench in active clay or a seasonally frozen site shifts with moisture. A rigid pipe cracks at the joint; a corrugated HDPE pipe flexes and the joints rotate slightly without leaking. For well intake this matters at the casing connection, and for collection it matters at every bend where the trench follows the land.
Transport and handling favor HDPE on remote sites. A coil of 110 mm corrugated filter pipe weighs a fraction of the same length in concrete and needs no crane to place. Water-well and drainage crews reach rural sites with a light truck, which lowers the total installed cost on spread-out agricultural projects where a concrete main would need heavy logistics.
耐化学性に優れる also covers the unusual duty. 焼却場浸出水 lines and some mine dewatering streams carry aggressive water that attacks metal and concrete. HDPE shrugs off most of these streams, so the same filter pipe serves environmental and industrial jobs beyond plain rainwater collection. The buyer confirms the exact chemical list with Faygo so the resin grade matches the stream.
How the Extrusion Line Builds the Pipe
The line starts with a gravimetric feeder that meters HDPE pellet blend into a 単一スクリュエキストラクター. The screw plasticizes the resin inside a heated barrel and pushes the melt through a die that forms a tube with the target wall thickness.
Right after the die, the hot tube enters the corrugator. Two chains of forming blocks close around the tube and press the ring profile. Block shape sets the corrugation pitch and depth, which decide ring stiffness and flexibility.
Before or after cooling, a perforation unit punches the holes or slots. A rotary head or a punch station cuts the openings at a set pitch and pattern. The pattern is the difference between a well screen and a drainage collector.
A spray cooling section locks the shape, a haul-off pulls at steady speed, and a cutter slices the pipe to length or coils it. The intelligent control system lets the operator set screw speed, melt temperature, and haul-off speed, then adjust in real time.
HDPE is more shear tolerant than PVC, so the line can run at a higher output for the same screw size. Faygo uses internationally renowned brand electrical components and closed-loop control to keep the melt uniform across the full L/D.
The die for filter pipe leaves a smooth bore by a fixed mandrel and a ring gap. The mandrel sets the inner diameter, the gap sets the wall, and the corrugator then forms the outer rings without touching the bore. Keeping the bore smooth is why well screens lose little pump energy even after years underground.
The perforation unit sits after the corrugator on most Faygo lines, because punching a hot, soft wall is cleaner than punching a cold, stiff one. A rotary head carries punches that strike as the pipe moves, so the hole pitch stays locked to the line speed. A slip in sync would put holes off the ring and weaken the wall, which the control system prevents by linking the punch drive to the haul-off encoder.
Slot versus hole is a punch-tool choice. Round holes suit gravel and coarse sand. Long slots suit fine sand because they give more open length at a narrow width that still blocks the grain. The tool set swaps in minutes, so a contract shop can switch from well screen to drain pipe within a product changeover rather than buying a second line.
Output balance follows the same rule as conduit: meters per minute for coil length and kilograms per hour for resin cost. A 20 mm well screen runs fast in meters but light in kilograms, while a 200 mm collector runs the opposite. The FXC-L reaches up to 220 kg/h, which a regional supplier needs to fill daily orders; a small FXC-S at 120 kg/h suits a local well contractor.
Faygo Lines for Filter Pipe
Faygo offers two product lines that cover filter pipe work. The single-wall corrugated line makes perforated corrugated filter pipe from 6 mm to 200 mm. The HDPE pipe line makes larger plain or perforated collection mains up to 575 mm.
Faygo PE/PP/PVC シングルウォール波形パイプ押出ライン
このラインは、穴あきコルクフィルターパイプのコア機です。PE、PP、およびPVCを使用し、6 mmから200 mmまで対応します。井戸と排水フィルターパイプの場合、耐化学性と低温強度の高さから、標準的な材料はHDPEです。
| パラメータ | FXC-S (small) | FXC-L (large) |
|---|---|---|
| Pipe Dia | 6-40 mm | 50-200 mm |
| Screw Ø | 50 mm | 75-90 mm |
| L/D | 33:1 | 33:1 |
| Output | Up to 120 kg/h | Up to 220 kg/h |
| Line Speed | Up to 20 m/min | Up to 14 m/min |
| Power | 45 kW | 90 kW |
FXC-S バリアントは小径のウェルスクリーンや庭の排水に適しています。FXC-L バリアントは、敷地排水や農業用水収集に使用される 110 mm から 200 mm のコレクターパイプをカバーします。
The corrugator on the FXC line forms the ring profile while the perforation unit waits downstream, so the two stations are independent. That separation lets the buyer run a plain corrugated pipe with the punch switched off, then switch the punch on for a filter run without touching the corrugator. The control recipe stores both modes so the operator picks one setting.
Drive sizing tracks the diameter. The FXC-S uses a 50 mm screw and about 45 kW, which is enough for thin small pipe. The FXC-L uses a 75 mm to 90 mm screw and about 90 kW to push the thicker melt of large collectors. Both share the intelligent control screen, so one operator trained on the small line can move to the large line without relearning the interface.
Coiling is standard for pipe up to about 200 mm on the corrugated line because the wall stays light. The reel lets a well contractor pull a long screen down the bore in one piece, which cuts joint count and leak risk. The cutter shifts to length mode when the buyer ships cut pieces, set by a control choice with no hardware change on the model.
Faygo HDPE パイプ押出ライン for Large Mains
When the engineer specifies large plain or slotted HDPE mains, the Faygo HDPE pipe line covers diameters from 12 mm to 575 mm with wall thickness up to 6.5 mm. It is the right base for trunk collectors that gather water from many laterals.
| パラメータ | HDPE Pipe Line |
|---|---|
| Pipe Dia | 12-575 mm |
| Screw Ø | 60-120 mm |
| L/D | 30:1-33:1 |
| Wall Thickness | Up to 6.5 mm |
| Output | Up to 400 kg/h |
| Power | 132 kW |
両ラインは、インテリジェント制御システム、72時間の事前納品テスト、およびCEおよびISO認証を共有します。親ブランドであるWanplasは、マッチしたローダー、ミキサー、およびチラーを提供するため、購入者は完全なトータルコストのレイアウトを得ることができます。
The HDPE pipe line for large mains adds a vacuum sizing sleeve and a longer cooling tank because solid-wall pipe needs forced roundness. The sleeve holds the hot pipe against a cooled mandrel under vacuum, then the tank fixes the diameter before the haul-off. This station is why the large line needs more floor length than the corrugated line, which the layout drawing shows in meters.
後続とメインを混合するプロジェクトでは、Wanplasは共有材料室を介してラインをリンクできます。1つのグラビテーションフィーダーと1つのミキサーが両択一のエキスプレスに供給され、製品間でレジングレードを同一にし、オペレータ数を削減します。共有室は、スクリーンとメインの両方をカバーする1つのバッチログにすることで、品質記録を簡素化します。
Water and power are the two services to size early. The corrugated line draws power at the extruder motor and corrugator drive; the cooling draws water that a chiller or tower returns to the tank. The large HDPE line draws more of both because of its bigger screw and longer tank. Faygo lists the peaks on the layout drawing so the buyer sizes the supply before delivery.
HDPE Material and In-Soil Performance
HDPE for filter pipe is a polyolefin with a dense, linear chain structure. Its resistance to water, salts, and most soil chemicals is the reason it outlasts metal in buried service. The table below lists typical property targets for pipe-grade HDPE.
| 特性 | 典型値 | Benefit Underground |
|---|---|---|
| Density | 0.94-0.97 g/cm3 | 扱いやすい軽量性 |
| 引張強さ | 20-35 MPa | Holds under load |
| Impact at low temp | Good below 0 C | Cold-climate safe |
| 耐化学性に優れる | Excellent | Long buried life |
| Water absorption | Near zero | No swell |
| Heat deflection temperature | About 60-80 C | Stable in soil |
溶融流動率 (MFR) of pipe-grade HDPE is low so the melt keeps enough strength through the die and corrugator. A high MFR grade would be easy to extrude but would give weaker pipe walls under soil load.
For well screens, the smooth inner wall matters. Lower surface roughness means less friction loss as water enters the well, so the pump works less. The corrugated outer wall carries the ring stiffness without adding weight.
Density grade sets the stiffness and the cost. Pipe-grade HDPE around 0.94 to 0.96 g/cm3 gives the ring stiffness most buried filter jobs need. A higher density grade raises stiffness for deep burial but costs more per kilogram. Faygo advises the grade by the cover depth and the soil load, recorded in the line recipe so the wall class repeats shift after shift.
Environmental stress crack resistance is the property that protects a buried pipe from slow failure at a scratch or a sharp stone point. A resin with high stress crack resistance resists the long-term load that would open a small flaw into a leak. The buyer confirms the rating for the soil and the chemical stream, because a leachate line needs more margin than a clean rainwater drain.
溶融流動率 (MFR) is kept low so the melt holds the ring through the die and corrugator. A high MFR grade extrudes easily but gives a weaker wall under soil load, so it is wrong for buried filter pipe. Faygo sets the MFR window during commissioning and stores it so a resin change is approved against the same number, not guessed.
Additives are minimal for HDPE because the base polymer already resists water and soil. A carbon-black masterbatch is common for UV protection on pipe stored above ground before burial, and a process aid may be added for a cleaner bore. Unlike PVC, HDPE needs no heat stabilizer or plasticizer, which keeps the compound simple and the recipe easy to repeat.
Perforation, Wrap, and Comparison
Perforation turns a corrugated pipe into a filter. Hole size, count, and layout are set by the soil: coarse gravel needs larger openings, fine sand needs smaller holes plus a geotextile wrap. The Faygo line lets the buyer set the perforation pattern through the punch unit.
The comparison below shows how a perforated corrugated filter pipe differs from a plain corrugated pipe and a smooth HDPE pipe for the same water job. The openings decide whether the pipe collects or just conveys.
| パイプタイプ | Openings | 機能 | 一般的な用途 |
|---|---|---|---|
| Perforated corrugated | はい | 収集と伝送 | Wells, drains |
| Plain corrugated | いいえ | Convey only | Cable, culvert |
| Smooth HDPE | オプション | Pressure convey | Supply main |
For underground water collection engineering, the perforated corrugated pipe is the balanced choice: it gathers water through the wall and moves it to the outlet in one product. A geotextile wrap is added when the soil is fine.
The wrap is the field half of the filter. The pipe openings set the maximum grain that passes; the geotextile sets the effective opening finer than the hole. In silty soil the wrap stops the slit from pumping fines into the bore, which is the main cause of a drain that works for one season and clogs the next. The line cannot apply the wrap, but Faygo sizes the hole pattern so a standard wrap grade fits the pipe without bridging the slots.
Hole pattern options follow the duty. A full-circle pattern suits a drain surrounded by wet soil on all sides. A half-circle pattern on top suits a pipe laid just above the water table where water enters from above. A line of holes along the ring valley suits a well screen where gravel packs against the pipe. The punch program selects the pattern, so one line serves all three by recipe.
Opening area is quoted as a percentage of the pipe surface or as square millimeters per meter. A higher area collects more water but weakens the wall slightly, so the engineer balances intake against the ring class. Faygo lists the opening area for each punch program so the buyer can match the number on the project spec rather than estimate from a photo.
へこみ付きHDPEスロットパイプと比較して、波形付きバージョンは、より低い壁重量で同じ剛性に達し、樹脂コストをメートルあたり低くします。非常に低い穴摩擦が圧力配管で必要な場合、滑らかなパイプが優れています。これはフィルターパイプの担当ではありません。収集と吸入では、波形付き穴あきパイプが効率的なデフォルトです。
Match the Line to the Engineering
The table below links common engineering needs to a recommended Faygo line. It matches diameter, material, and duty to the correct product line so buyers can shortlist before a formal quote.
| 必要 | 材料 | Faygo ライン |
|---|---|---|
| Small well screen | HDPE | FXC-S corrugated line |
| Site drain collector | HDPE | FXC-L corrugated line |
| Trunk collection main | HDPE | HDPE pipe line |
| Multi-material trials | PE/PP/PVC | FXC-Lに予備ブロックを備えたもの |
小さな後続と大きなメインを混合するプロジェクトでは、Wanplasは共有エキスプレスベースを2つの下流セットに構成できます。これにより、総設備コストレベルが低下し、サイト全体でスペアパーツが簡素化されます。
日ごとの走行長さは、冷却とカッターのサイズを決定します。8,000メートルの井戸スクリーンを毎日作る必要があるラインには、ハウルオフの速度が高く、コイラーが大きい必要があります。Faygoはコルクのチェーンとコイラーを日ごとの目標に基づいてサイズ設定します。そのため、見積もりは時間当たりキログラムではなく、日ごとのメートルです。
土壌温度と水は冷却設計に影響します。涼しい地域で冷たい井戸水が流れる工場では、パイプをより速く冷却でき、同じ速度でより短いタンクを運用できます。暑い地域では、同じ速度で運用するために、より長いタンクまたは強力なチラーが必要です。レイアウト図には、ラインが調整された水温が記載されているため、購入者は現地供給と一致させるか、Wanplasのチラーを追加します。
オペレーターの経験がスタートモデルを導きます。確立された水井会社は、最初の週からフルスピードでFXC-Lを稼働させることができます。Faygoのトレーニングは両方をカバーしているため、注文量が増えるとスムーズにモデルをアップグレードできます。
Resin supply is a selection factor often missed. HDPE is bought by grade and MFR, and a regional supplier may only stock one grade. Faygo confirms the local grade during quoting so the line is commissioned on the resin the buyer will actually run, avoiding a second tuning visit after the first shipment.
Standards, 設置, and Quality
埋め込まれた排水 and well screen pipe must meet local codes for environmental and structural safety. In many markets, the pipe carries a marking that confirms the grade and the opening class. Faygo supplies material and perforation guidance so the buyer can match the spec.
In the trench, installers lay the filter pipe on a prepared bed, wrap fine-grade sections with geotextile, and backfill with clean stone. The corrugated wall keeps ring stiffness during backfill, so the pipe does not oval under the roller.
Faygoの品質管理は出荷前に行われます。すべてのラインは72時間の連続運転テストを実施し、国際的に有名なブランドの電気部品を使用し、出荷時にCEおよびISO認証を取得しています。インテリジェント制御システムはレシピを保存するため、同じフィルターパイプがシフトごとに繰り返されます。
Site installation follows a set sequence. The line is leveled on the foundation, the cabinet is wired by a certified electrician, and the water and air lines are connected. Only then does Faygo commission the line with a real HDPE run and a sample coil. Starting the extruder before cooling is ready scorches the first meters, which the sequence avoids.
The perforation unit needs a setup check before a production run. The punch depth and the sync with haul-off are verified on a short sample so the holes land on the ring and the wall is not cut through. The 72-hour test already covers this on the Faygo floor, but the buyer’s first shift should still confirm hole position before pushing full output.
Field laying of the finished pipe decides performance. Installers lay the filter pipe on a prepared bed, wrap fine sections with geotextile, and backfill with clean stone. The corrugated wall keeps ring stiffness during backfill so the pipe does not oval under the roller. Faygo ships a laying guide with the line that gives the bed and backfill rules for common soils.
Service and Factory Assurance
Faygo delivers more than a machine. The factory provides customized turnkey solutions covering selection, design, manufacturing, installation, commissioning, training, and maintenance. For new plants, Faygo also advises on water and electricity design, factory site layout with 3D workshop planning, and worker configuration.
After delivery, support includes 24/7 online technical help, a warranty that covers damaged parts, and 年間500米ドルの無償スペアパーツ。 The Wanplas open-factory policy welcomes buyers to inspect production and run a sample trial before committing to a full order.
Old machine replacement is handled with a zero-downtime upgrade path, and capacity expansion projects target the bottleneck to double output without rebuilding the whole shop. These services apply across the Faygo pipe and profile program.
よくある質問
What is an HDPE perforated corrugated filter pipe?
It is a corrugated HDPE pipe with rows of holes or slots that let groundwater enter while a wrap or the corrugation gap blocks soil. It is used for well water intake and underground water collection.
Which Faygo line makes this pipe?
The Faygo PE/PP/PVC single-wall corrugated パイプ押出ライン covers 6 mm to 200 mm and is fitted with a perforation unit. Larger plain HDPE collection mains use the Faygo HDPE pipe line up to 575 mm.
How are the holes made?
波形壁の成形後に、回転またはパンチパージョンユニットが穴またはスロットを切ります。穴のサイズ、ピッチ、およびパターンは、プロジェクトのインタケまたは排水要件によって設定されます。
Why choose HDPE over PVC here?
HDPE resists chemical and biological attack in wet soil, stays tough at low temperature, and flexes with ground movement. That makes it the preferred material for buried water collection.
What wall thickness is typical?
For corrugated filter pipe the wall is thin and ring-shaped, while the broader Faygo pipe program reaches up to 6.5 mm for solid HDPE mains. The line is tuned to the diameter and duty.
Faygoは納品前にラインをテストしますか？
はい。すべてのラインは72時間の連続運転テストを実施し、国際的に有名なブランドの電気部品を使用し、CEおよびISO認証を取得して出荷されます。また、年間500米ドルの無償スペアパーツが提供されます。
1台のラインで井戸と排水を同時に処理できますか？
Yes. By changing the perforation pattern and wrap, the same corrugated line produces well screens, French drain pipe, and dewatering collector pipe from the same HDPE base.
Well Screen and Drain Layout Examples
A well screen layout starts from the bore diameter and the gravel pack. The screen sits at the bore bottom inside a gravel pack that filters the aquifer. The opening area is sized so the entering velocity stays low, which protects the pack from pulling in fines. The Faygo line makes the screen to that opening area by the punch program, and the same pipe serves monitoring wells and production wells with only a pattern change.
A French drain layout places the filter pipe in a trench with a stone surround and a geotextile wrap. Water from the soil enters through the holes and flows to the outlet by gravity. The corrugated wall carries the soil load while the smooth bore keeps the flow even. A long site drain may use several FXC-S reels joined in the trench, which a single line supplies as one coil length.
A dewatering collector for a construction pit uses the same pipe at a steeper grade so water runs to a sump. The holes face the wet side, set by the half-circle punch program. The contractor pumps from the sump, and the pipe keeps the pit dry enough to excavate. The FXC-L makes the larger collector that a big pit needs, while the FXC-S suits a small basement job.
A landfill leachate line uses the filter pipe in an aggressive stream, so the resin grade and the wrap are chosen for chemical resistance. The same corrugated base works because HDPE resists the leachate; only the grade and the slot width change. Faygo confirms the chemical list during quoting so the line runs the right resin from the first coil.
Energy Use and Long-Term Care
The main energy draw is the extruder motor, which turns power into melt heat and pressure. The corrugator drive and haul-off add a smaller load. The FXC-S draws about 45 kW at full output; the FXC-L about 90 kW. The cooling system adds pump power set by tank size and water temperature.
Operator workload stays low. One person manages feeding, monitoring, and coil change on a standard line. The intelligent control system alarms on melt pressure drift and haul-off fault, so the operator reacts to warnings rather than watching every gauge. A second operator helps only where heavy cut pipes are bundled at the exit.
Long-term care targets the melt-contact and moving parts. The screw and barrel wear slowly, so output at a fixed speed is the early sign. The corrugator chains and block hinges wear with use, checked each month. The punch blades dull with every hole, so a spare blade keeps the slots clean. Faygo ships USD 500 free spare parts per year covering seals, sensors, blades, and belts.
Faygoのリモートサポートは、制御データを読み取ってエンジニアが故障前にドリフトを把握できるようにします。これにより、購入者は故障を待たずにサービスを計画できます。崩壊した溶融圧力を早期に発見することで、スクリュー（交換するのが最も高価な部品）を保護し、プロジェクトのフィルターパイプのグレードを安定させることができます。
結論
An HDPE perforated corrugated filter パイプ押出ライン is the practical answer for well water intake and underground water collection engineering. Faygo, a Wanplas factory with 22 years of pipe and profile experience, builds both the single-wall corrugated line and the HDPE pipe line that cover filter pipe from 6 mm to 575 mm. Every line is CE and ISO certified, tested for 72 hours before shipment, and backed by 年間500米ドルの無償スペアパーツ。 Send your pipe diameter, material, and output target to receive a tailored line configuration, schedule a factory audit, or book a sample trial run.
